Petro Chemistry | Fuel and Lubricant Analysis | Analysis and Quality Determination in Crude Oil Production

Spectroscopic Online Process Monitoring for More Efficiency and Yield in Oil Production

Before being used, crude oil and natural gas are being processed in refineries into mineral oil products such as petrol, diesel heating oil, etc. or pretreated as chemical raw materials. Most of the oil and gas extracted goes to the heating and energy market, only one third is being used in form of chemical raw materials. Petroleum and natural gas products are processed into numerous household and industrial products, e.g. cosmetics, household cleaners, vehicle components and much more.

Almost the entire world economy depends on the availability of affordable oil and efficiency in extracting this limited resource is of paramount importance.

oil rig


More efficiency and yield in oil production



Area of Application

Online Process Monitoring with NIR Spectroscopy for a Precise Measurement of the Water Content in Oil



Scope of Application

  • Oil Industry/Gas Industry
  • Fossil Fuels
  • Oil Production
  • Water in Liquid Ratio (WLR)


  • Process Analytical Technology (PAT)

  • NIR Spectroscopy

  • Measurement Technology


  • NIR-Spectroscopy

  • Online/Inline/Atline

  • Real-Time Measurement


  • Precise Measurement Results
  • Optimisation of the Output
  • Increase in Efficiency
  • Process Optimisation

The Challenge

Oil Production – Complex, Dangerous and Expensive

The exploitation of oil deposits is technically very complex and production costs are high. The major challenges of the petro chemistry therefore include, besides the development of new oil deposits, the increase of yield from oil fields that have already been exploited. For the optimal control of the production process and the best possible yield of high-quality oil, continuous monitoring of the water and gas content is indispensable. Excessive production can lead to dilution and a decrease in yield. To avoid this, it is important to collect and evaluate drill samples at regular intervals. Checking the water content during the production helps to optimize the pump performance so that in the end more oil can be produced in the same time.

The extraction of oil and gas means dealing with enormous amounts of energy. High pressures and corrosive environments are the rule and place high demands on the products used in terms of stability, resistance and safety.

The Application

Manual Sample Taking – Inaccurate, Cumbersome and Time-Consuming

manual analysis of an oil sample in the laboratory

The precise measurement of the water content in oil is not an easy task. Fluctuations of the solids, the gas volume fraction or variations in salinity can entail inaccurate measurement results. Besides, oil is very viscous and the environmental conditions vary strongly. Conventional measurement methods based on phase separation are often not precise enough and the analysis of the measurement data in the laboratory cumbersome and time-consuming. Due to the risk of explosion at the oil pipeline, products used in this environment must be certified according to the ATEX product directive 2014/34 / EUATEX.

Products of the brand:


Hellma USA Inc.
120 Terminal Drive
11803 Plainview, NY
United States

Phone: +1 5169 3908 88


Disabled, please use email.

Spectroscopic Online Process Monitoring for Increased Efficiency and Output in Oil Production


Thank you very much for your interest in our download of "Spectroscopic Online Process Monitoring for Increased Efficiency and Output in Oil Production". Please fill in the form below and we will send you the requested link to the given e-mail address.

Note: Your data will of course be treated confidentially and will not be shared with third parties. You can revoke your consent at any time by clicking on the end of each e-mail.
Required Field